Tough and precised gauges for general use for the measurement of non aggressive and non-crystalizing fluids.

Dry type or liquid filled

• Materials:
  Case in AISI 304 st.,
  AISI 316 to DS 100 and 150
  Wetted parts: Brass/Copper alloy
• Dial nominal size (mm):
  63 – 80 - 100 – 150
• Ranges:
  from 0/0,6 to 0/600 bar and vacuum

Entirely manufactured in stainless steel particulary resistant to bed conditions of exercise
Conform to EN837-1 standard

Dry type or liquid filled

• Materials:
  Case in AISI 304 st.,
  AISI 316 to DS 100 and 150
  Wetted parts in AISI 316L st. st.
• Dial nominal size (mm):
  63 – 80 – 100 – 150 – 200 – 250
• Ranges:
  from 0/0,6 to 0/1600 bar and vacuum

Entirely manufactured in stainless steel particulary recommended for the operator safety
Conform to EN837-1 standard

Dry type or liquid filled

• Materials:
  Case in AISI 304 st.
  Wetted parts in AISI 316L st. st.
• Dial nominal size (mm):
  100 – 150
• Ranges:
  from 0/0,6 to 0/1600 bar and vacuum

Gauges suitable for control panels and centralised control rooms.

• Materials:
  Case in fenolic resin
  Wetted parts in AISI 316L st. st.
• Dimension (mm)::
  96x96 – 144x144 – 144x72
• Ranges:
  from 0/0,6 to 0/1600 bar and vacuum

Gauges suitable for high viscosity and high crystalization fluids.
Conform to EN837-3 standard

• Materials:
  Case in AISI 304 st. st.,
  AISI 316 to DS 100 and 150
  Wetted parts in AISI 316L st. st.
• Dial nominal size (mm):
  100 – 150 – 200
• Ranges:
  from 0/25 mbar to 0/16 bar and vacuum
• Overpressure:
  3 times F.S.V.

Gauge suitable for low pressure measure with high viscosity and high crystallization fluids.

• Materials:
  Case in AISI 316 st. st.
  Wetted parts in AISI 316
• Dial nominal size (mm):
  100 – 150
• Ranges:
  from 0/25 mbar to 0/2,5 bar and vacuum
• Overpressure:
  30% V.F.S..

Gauges for the measurement of low pressures; used for ventilation and conditioning systems, gas distribution nets or leak survey systems.

• Materials:
  Case DS63 and 80 chrome steel,
  DS100 and 150 inox in AISI 316 st.st.
  Watted parts in Brass/AISI 316 st. st.
• Dial nominal size (mm):
  63 – 80 – 100 – 150
• Ranges:
  from 0/25 mbar to 0/400 mbar and vacuum

Gauges used for measurement of differential low pressure also with high static pressures.

• Materials:
  Case in AISI 316 st. st.
  Wetted parts in AISI 316L st. st.
• Dial nominal size (mm): 150
• Ranges:
  from 0/25 mbar to 0/16 bar
• Total static pressure: 64 bar

Gauges to measure low differential pressures.

• Materials:
  PIREX glass tube
  Connection in AISI 316L st. st.
• Ranges:
  from 100/0/100 to 1500/0/1500 mm
• Total static pressure:
  40 bar up to 800 mm – 20 bar over

Gauges used to calibrate and test industrial gauges or for measurements in the laboratory.

• Materials:
  Case in AISI 304 st. st
  AISI 316 to DS 100 and 150
  Wetted parts in AISI 316L/CuBe alloy
• Dial nominal size (mm):
  100 – 150 – 200 – 250
• Ranges:
  from 0/60 mbar to 0/1000 bar
• Accuracy: class 0,25
  (class 0,6 for DS100 and ranges from 60 to 400 mbar)

Piezoresistive sensor transmitter

• Materials:
  Case in AISI 304 st. st.
  Wetted parts in AISI 316L st. st.
• Ranges:
  from 0/0,25 to 0/25 bar
• Supply:
  13 ÷ 30 VDC
• Eletrical connection:
  4 poles plug connector